Brocade EZSwitchSetup Administrator’s Guide (Supporting 300, 5100, 5300, 6505, 6510, 6520, 7800, 7840, and VA-40FC) - Manual (Page 34)

a) Remove any protector plugs from the SFP transceivers to be used.
b) Position and insert each SFP transceiver as required (right-side up in the top row of ports
and upside down in the bottom row of ports) until it is firmly seated.
c) Close the latching bale.
1 Brocade switch
2 Open the SFP latching bale
Setting Up Your Switch
32 EZSwitchSetup Administrator’s Guide
53-1003129-01