Status bar, Launching the ezswitchsetup switch manager – Brocade EZSwitchSetup Administrator’s Guide (Supporting 300, 5100, 5300, 6505, 6510, 6520, 7800, 7840, and VA-40FC) User Manual
Page 40
Status bar
The status bar that appears at the bottom of the window is divided into the following sections:
•
Progress indicator
When Switch Manager is sending data to or retrieving data from the switch, this indicator is
animated.
•
User name and IP address
The status bar displays your user name, role, and the IP address of the switch to which you are
connected.
Launching the EZSwitchSetup Switch Manager
You can launch Switch Manager on any workstation with a compatible browser installed. For a list of
compatible browsers, refer to
Table 1 on page 2
. Switch Manager also supports HTTPS, if that
protocol is enabled for the switch. For more information on enabling HTTPS on your switch, refer to
the Fabric OS Administrator's Guide.
1.
Launch a browser, and type the IP address of the switch in the Address field, and press Enter.
FIGURE 22 Java Web Start dialog box
Status bar
38
EZSwitchSetup Administrator’s Guide
53-1003129-01