Port information tab, Changing switch information – Brocade EZSwitchSetup Administrator’s Guide (Supporting 300, 5100, 5300, 6505, 6510, 6520, 7800, 7840, and VA-40FC) User Manual
Page 48
Port Information tab
Select the Port Information tab to view the port information. Detailed port information is displayed as
a categorized list of properties, which may be viewed, copied, or exported by category.
FIGURE 35 Port Information tab
The information page displays the following for each port:
•
Port number
•
Port name
•
State of the port
•
Port type
•
Status (health) of the port
•
Indication of whether the port is licensed
Changing switch information
From the Switch Manager, you can relaunch the EZSwitchSetup switch configuration wizard to
perform the following tasks:
•
Change the switch name.
•
Change the switch time.
•
Change the admin password.
•
Change the zoning configuration type.
The EZSwitchSetup switch configuration wizard was launched the first time you set up the switch.
1.
Click Setup under Switch in the Tasks panel.
Port Information tab
46
EZSwitchSetup Administrator’s Guide
53-1003129-01