Brocade EZSwitchSetup Administrator’s Guide (Supporting 300, 5100, 5300, 6505, 6510, 6520, 7800, 7840, and VA-40FC) - Manual (Page 59)

If you click Finish, allow time for the new scheme to be created. The Zone Access Map for
Devices is updated with any new aliases, and a Zone commit succeeded confirmation dialog box
is displayed.
8. Dismiss the confirmation dialog box. The Zone Access Map for Devices is updated to show the
new accessibility relationships.
FIGURE 46 Zoning summary information
Validating zoning configuration
You can validate the current zoning configuration against the following rules:
• Every HBA has access to at least one storage device.
• Every storage device is accessible by at least one HBA.
• No offline devices exist in the zoning configuration.
If offline devices are in the current zoning setup, you are prompted to delete those devices from the
zoning database.
1. Click Validate under Zoning in the Tasks panel.
The Validate Zoning wizard launches.
2. Follow the instructions in the wizard.
3. Note any devices that are not zoned properly and, after exiting the wizard, click Edit to update the
zone configuration.
Validating zoning configuration
EZSwitchSetup Administrator’s Guide 57
53-1003129-01