HATZ Diesel 1B 50 - Manual (Page 36)

Step Activity
1 Check the speed control (see the chapter ).
2 Insert the starting key all the way and turn to position "I".
Depending on the model, the following indicators light up:
▪ Charge control (2)
▪ Oil pressure display (3)
▪ Pre glow display (5)
NOTES:
▪ If the engine temperature display (4) lights up, the cylinder
head temperature is impermissibly high. Do not start the en-
gine; eliminate the cause.
▪ When the optional pre glow display (5) goes out, continue with
step 3.
3 Turn the starting key to position "II".
4 As soon as the engine is running, release the starting key.
▪ The starting key springs back to position "I" and remains in
this position during operation.
▪ The charge control (2) and oil pressure display (3) go out.
▪ The operating display (1) lights up.
NOTICE
i
▪ In case of irregularities, switch off the engine immediately.
▪ Identify the fault and eliminate it.
▪ For details of troubleshooting, see the chapter 9 Faults,
page 77.
Electrical automatic shutoff (additional equipment)
The distinguishing feature of the electrical automatic shutoff is brief flashing
of all indicators after turning the starting key to position "I".
Operation and use 1B20, 1B27, 1B30, 1B40, 1B50
36 Operator's Manual 1B20-1B50 HATZ