HATZ Diesel 1B 50 - Manual (Page 65)

Procedures
The exhaust screen can be cleaned in different ways depending on how the
engine is equipped:
▪ Cleaning the exhaust screen in standard models
▪ Cleaning the exhaust screen in models for rammer operation (1B20 R)
Cleaning the exhaust screen in standard models
Step Activity Figure
1 Release the hex nut and take
off the exhaust manifold (1).
2 Remove the hex nut from the
bracket (2) and pull out the
screen insert (3).
3 Remove the deposits in the
screen insert with a suitable
wire brush.
4 Check the screen insert for
cracks or breakage, and re-
place if necessary.
5 Mount the screen insert and
bracket again.
1B20, 1B27, 1B30, 1B40, 1B50 Maintenance
HATZ Operator's Manual 1B20-1B50 65