HATZ Diesel 1B 50 - Manual (Page 56)

Step Activity Figure
4 Check the gasket (3) for dam-
age and renew if necessary.
5 Lightly oil the gaskets (3+4)
before mounting.
6 Insert the oil filter and press it
all the way in.
7 Before tightening the screw,
ensure that the tension springs
(5) rest against the oil filter at
both ends.
Tighten the screw.
8 Check the oil level and add oil
to the max. mark if necessary
(see the chapter 4.3 Engine
oil, page 24).
8.2.6 Check and set the tappet clearance
Safety notes
CAUTION
Danger of burns.
There is a danger of burns when working on a hot engine. Only
perform the settings while the engine is cold (10-30 °C).
▪ Let the engine cool.
NOTICE
i
This chapter only applies to engines without an automatic valve
lash adjustment.
This can be identified on the supplied maintenance plan (see the
chapter 8.2.2 Maintenance plan, page 49).
Maintenance 1B20, 1B27, 1B30, 1B40, 1B50
56 Operator's Manual 1B20-1B50 HATZ