LT Security LTN7600 Series NVR (V2.2.3) - Manual (Page 12)

User Manual of DS-9600/8600/7700/7600 Series NVR
12
1.1 Front Panel
Figure 1. 1 LTN7732 and LTND7732-P8
Table 1. 1 Description of Control Panel Buttons
No. Name Function Description
1
Status Indicators
POWER: the POWER indicator turns green when
NVR is powered up.
READY: The indicator light is green when the device
is running normally.
STATUS: 1.The light is green when the IR remote
control is enabled; 2.The light is red when the function
of the composite keys (SHIFT) are used; 3. The light
is out when none of the above condition is met/
ALARM: the light is red when there is an alarm
occurring.
HDD: the indicator flickers red when HDD is
reading/writing.
Tx/Rx: TX/RX indicator flickers green when network
connection is functioning normally.
SHIFT
Switch between the numeric or letter input and
functions of the composite keys. (Input letter or
numbers when the light is out; Realize functions when
the light is red.)
2 DVD-R/W Slot for DVD-R/W.
3 Control Buttons
Directional buttons:
In menu mode, the direction buttons are used to
navigate between different fields and items and select
setting parameters.
In playback mode, the Up and Down buttons are used
to speed up and slow down record playing, and the
Left and Right buttons are used to move the recording
30s forwards or backwards.
In the image setting interface, the up and down button
can adjust the level bar of the image parameters.
In live view mode, these buttons can be used to switch
channels.