LT Security LTN7600 Series NVR (V2.2.3) User Manual
Page 33
User Manual of DS-9600/8600/7700/7600 Series NVR
33
2) Check the checkbox of certain cameras to be added.
3) Click Quick Add to add the camera.
3.
To add other IP cameras:
1) On the left side of the interface, you can enter the IP address, protocol, management port,
user name, password and other information of the IP camera to be added.
2) Click Add to add the camera.
Note:
If you check the Synchronize IP Camera checkbox, the default settings of the
NVR for the IP camera is applied to the added camera.
2.3.2 Editing the connected IP cameras and Configuring
Customized Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page, you can
configure the basic setting of the IP cameras.
Steps:
1.
Click the
icon to edit the parameters; you can edit the IP address, protocol and other
parameters.
Figure 2. 12 Edit the Parameters
2.
Click apply to save the settings and click OK to exit the editing interface.
To edit more parameters:
1.
Click the Advance Set icon.