LT Security LTN7600 Series NVR (V2.2.3) - Manual (Page 14)

User Manual of DS-9600/8600/7700/7600 Series NVR
14
No. Name Function Description
input).
Double press the button to switch the main and
auxiliary output.
5 JOG SHUTTLE Control
Move the active selection in a menu. It will move the
selection up and down.
In Live View mode, it can be used to cycle through
different channels.
In the Playback mode, it can be used to jump 30s
forward/backward in video files.
In PTZ control mode, it can control the movement of
the PTZ camera.
6 POWER ON/OFF Power on/off switch.
7 USB Interfaces
Universal Serial Bus (USB) ports for additional
devices such as USB mouse and USB Hard Disk Drive
(HDD).
Figure 1. 2 LTN7616,LTN7604-P4, LTN7608-P4 and LTN7608-P8
Table 1. 2 Description of Control Panel Buttons
No. Name Function Description
1 USB Interface Connects USB mouse or USE flash memory devices.
2 Status Indicators
POWER: the POWER indicator turns green when
NVR is powered up.
READY: The indicator light is green when the device
is running normally.
STATUS: 1.The light is green when the IR remote
control is enabled; 2.The light is red when the function
of the composite keys (SHIFT) are used; 3. The light is
out when none of the above condition is met/
ALARM: the light is red when there is an alarm
occurring.
HDD: the indicator flickers red when HDD is
reading/writing.
Tx/Rx: TX/RX indicator flickers green when network
connection is functioning normally.
3 SHIFT
Switch between the numeric or letter input and
functions of the composite keys. (Input letter or
numbers when the light is out; Realize functions when
the light is red.)
Composite 1/MENU:
Enter numeral “1”;