LT Security LTN7600 Series NVR (V2.2.3) - Manual (Page 28)

User Manual of DS-9600/8600/7700/7600 Series NVR
28
2.2 Using the Wizard for basic configuration
By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure 2. 2.
Figure 2. 2 Start Wizard Interface
Operating the Setup Wizard:
1. The Setup Wizard can walk you through some important settings of the NVR. If you don’t
want to use the Setup Wizard at that moment, click the Cancel button. You can also choose
to use the Setup Wizard next time by leaving the “Start wizard when the device starts?”
checkbox checked.
2. Click Next button on the Wizard window to enter the Login window, as shown in Figure 2.
3.
Figure 2. 3 Login Window
3. Enter the admin password. By default, the password is 12345.
4. To change the admin password, check the New Admin Password checkbox. Enter the new
password and confirm the password in the given fields.