Configuring hdd group for recording and capture, 8 configuring hdd group for recording and capture – LT Security LTN7600 Series NVR (V2.2.3) User Manual
Page 76
User Manual of DS-9600/8600/7700/7600 Series NVR
76
5.8 Configuring HDD Group for Recording and
Capture
Purpose:
You can group the HDDs and save the record files and captured pictures in certain HDD group.
Steps:
1.
Enter HDD setting interface.
Menu>HDD
Figure 5. 27 HDD General
2.
Select Advanced on the left bar.
Figure 5. 28 Storage Mode
Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed
information, please refer to Chapter 12.4 Managing HDD Group.
3.
Select General in the left bar.
Click
to enter editing interface.
4.
Configuring HDD group.
1) Choose a group number for the HDD group.
2) Click Apply and then in the pop-up message box, click Yes to save your settings.
3) Click OK to back to the upper level menu.
Repeat the above steps to configure more HDD groups.
5.
Choose the Channels which you want to save the record files and captured pictures in the
HDD group.
1) Select Advanced on the left bar.
Figure 5. 29 HDD Advanced
2) Choose Group number in the dropdown list of Record on HDD Group