Setting ptz presets, patrols & patterns, Customizing presets, 2 setting ptz presets, patrols & patterns – LT Security LTN7600 Series NVR (V2.2.3) User Manual
Page 51: 1 customizing presets
User Manual of DS-9600/8600/7700/7600 Series NVR
51
4.2 Setting PTZ Presets, Patrols & Patterns
Before you start:
Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.
4.2.1 Customizing Presets
Purpose:
Follow the steps to set the Preset location which you want the PTZ camera to point to when an
event takes place.
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
Figure 4. 2
PTZ- More Settings
2.
Use the directional button to wheel the camera to the location where you want to set preset.
3.
Click the round icon before Save Preset.
4.
Click the preset number to save the preset.
Repeat the steps2-4 to save more presets. If the number of the presets you want to save is more
than 17, you can click […] and choose the available numbers.
Figure 4. 3
More Presets