LT Security LTN7600 Series NVR (V2.2.3) - Manual (Page 127)

User Manual of DS-9600/8600/7700/7600 Series NVR
127
4. Set up arming schedule of the channel.
Select Arming Schedule tab to set the channel’s arming schedule for the motion
detection.
Choose one day of a week and up to eight time periods can be set within each day.
Note: Time periods shall not be repeated or overlapped.
Figure 8. 3 Set Arming Schedule of Motion Detection
5. Click Handling tab to set up alarm response actions of motion alarm (please refer to Chapter
Setting Alarm Response Actions).
Repeat the above steps to set up arming schedule of other days of a week. You can also use
Copy button to copy an arming schedule to other days.
6. Click the OK button to complete the motion detection settings of the channel.