LT Security LTN7600 Series NVR (V2.2.3) - Manual (Page 174)

User Manual of DS-9600/8600/7700/7600 Series NVR
174
10.8 Configuring HDD Error Alarms
Purpose:
You can configure the HDD error alarms when the HDD status is Uninitialized or Abnormal.
Steps:
1. Enter the Exception interface.
Menu > Configuration > Exceptions
2. Select the Exception Type to HDD Error from the dropdown list.
3. Click the checkbox(s) below to select the HDD error alarm type (s), as shown in Figure 10.
24.
Note: The alarm type can be selected to: Audio Warning, Notify Surveillance Center, Send Email
and
Trigger Alarm Output. Please refer to Chapter Setting Alarm Response Actions.
Figure 10. 24 Configure HDD Error Alarm
4. When the Trigger Alarm Output is selected, you can also select the alarm output to be
triggered from the list below.
5. Click the Apply button to save the settings