LT Security LTN8600 Series NVR (V2.3.2) User Manual
Page 154
User Manual of 9600/8600/7700/7600 Series NVR
154
Figure 10. 6 Physical Disk Settings Interface
2.
Click Creat button to enter the Create Array interface.
Figure 10. 7 Create Array Interface
3.
Edit the Array Name; set the RAID Level to RAID 0, RAID 1, RAID 5 or RAID 10; select the Physical
Disk that you want to configure array.
Notes:
1)
If you choose RAID 0, at least 2 HDDs must be installed.
2)
If you choose RAID 1, 2 HDDs need to be configured for RAID 1.
3)
If you choose RAID 5, at least 3 HDDs must be installed.
4)
If you choose RAID 10, 4/6/8 HDDs need to be configured for RAID 10.
4.
Click OK button to create array.
Note:
If the number of HDDs you select is not compatible with the requirement of the RAID level, the error
message box will pop up.