LT Security LTN8600 Series NVR (V2.3.2) - Manual (Page 198)

User Manual of 9600/8600/7700/7600 Series NVR
198
13.5 Restoring Default Settings
Steps:
1. Enter the Default interface.
Menu > Maintenance > Default
Figure 13. 15 Restore Factory Default
2. Click the OK button to restore the default settings.
Note: Except the network parameters (including IP address, subnet mask, gateway, MTU, NIC working mode,
default route and server port), all other parameters of the device will be restored to factory default settings.