LT Security LTN8600 Series NVR (V2.3.2) User Manual
Page 39
User Manual of 9600/8600/7700/7600 Series NVR
39
PoE interfaces, you must disable 2 PoE interfaces in the Edit IP Camera menu.
To add Cameras for NVR supporting PoE function:
Before you start:
Connect the network cameras via the PoE interfaces.
Steps:
1.
Enter the Camera Management interface.
Main menu> Camera> Camera
You can see the connected cameras are listed.
Figure 2. 19 List of Connected Cameras
Note:
The cameras connecting to the PoE interface cannot be deleted in this menu.
2.
Click the Edit button, and select the Adding Method in the drop-down list.
•
Plug-and-Play: It means that the camera is connected to the PoE interface, so in this case, the
parameters of the camera can‟t be edited. The IP address of the camera can only be edited in the
Network Configuration interface, see Chapter 9.1 Configuring General Settings for detailed
information.