LT Security LTN8600 Series NVR (V2.3.2) - Manual (Page 4)

User Manual of 9600/8600/7700/7600 Series NVR
4
Product Key Features
General

Connectable to network cameras, network dome and DVS.
 Connectable to the third-party network cameras like AXIS, ONVIF, PANASONIC, PSIA,
SAMSUNG and SANYO.
 PAL/NTSC adaptive video inputs.
 Each channel supports dual-stream.
 Up to 64 network cameras can be connected for 9600/8600 series NVR, 32 network cameras for
7700/S-P8, and 16 network cameras for 7600/S-P8.
 Independent configuration for each channel, including resolution, frame rate, bit rate, image quality,
etc.
 The quality of the input and output record is configurable.
Local Monitoring
 Simultaneous HDMI, VGA and CVBS outputs.

HDMI output and VGA output at up to 1920×1080 resolution.
 Multiple screen display in live view is supported, and the display sequence of channels is adjustable.
 Live view screen can be switched in group, and manual switch and automatic cycle live view are also
provided, and the interval of automatic cycle can be adjusted.
 Quick setting menu is provided for live view.
 Motion detection, tamper-proof, video exception alert and video loss alert functions.
 Privacy mask.
 Multiple PTZ protocols supported; PTZ preset, patrol and pattern.
 Zooming in by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management
 For 9600-X series, up to 16 SATA hard disks and 2 eSATA disks can be connected. For 7600/S-P8
series, 2 SATA hard disks and 1 eSATA disks can be connected. For 7700/S-P8 series, 4 SATA hard
disks and 1 eSATA disk can be connected. And up to 8 SATA hard disks and 1 eSATA disk can be
connected for other models. (Each disk with a maximum of 4TB storage capacity.)
 8 network disks (8 NAS disks, or 7 NAS disks+1 IP SAN disk) can be connected.
 Support eSATA disks for recording or backup.
 Support S.M.A.R.T. and bad sector detection. (Not supported with 9600-R series NVR.)
 HDD group management.
 Support HDD standby function.
 HDD property: redundancy, read-only, read/write (R/W).
 HDD quota management; different capacity can be assigned to different channel.
 Support RAID0, RAID1, RAID5, RAID10 storage scheme. And 8 virtual disks can be configured.
(Only for the 9600-R series NVR.)
Recording, Capture and Playback
 Holiday recording schedule configuration.
 Normal and event video encoding parameters.
 Multiple recording types: manual, normal, alarm, motion, motion | alarm, motion & alarm.

8 recording time periods with separated recording types.
 Pre-record and post-record for alarm, motion detection for recording, and pre-record time for