LT Security LTN8600 Series NVR (V2.3.2) - Manual (Page 178)

User Manual of 9600/8600/7700/7600 Series NVR
178
Figure 11. 20 Copy Settings to Other Camera(s)
6. Select the camera (s) to be configured with the same quota settings. You can also click the checkbox of IP
Camera to select all cameras.
7. Click the OK button to finish the Copy settings and back to the Storage Mode interface.
8. Click the Apply button to apply the settings.
Note: If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record and
picture capture.