Avaya 4600 - Manual (Page 35)

Issue 2 July 2006 35
NVBACKUPSGIP “” (Null) This parameter controls the back
up IP address or the back up
fully qualified domain name of
the security device. If the VPN
Client could not connect to the
primary security device, VPN
Client attempts to connect to the
security devices in this list.
A maximum of 4 back-up
security gateways can be
configured.
Enter the value in dotted decimal
format or DNS name format.
Valid values are zero or more IP
Addresses in dotted-decimal or
DNS name format, separated by
commas without any intervening
spaces (0 to 255 ASCII
characters, including commas).
Null (“”) is a valid value, but the
value may not contain spaces.
This value cannot be more than
30 characters.
To set the device backup IP
address to 10.1.1.2,
bk1sg.mycompany.com, and
bk2.mycompany.com as backup
security devices, use the following
command:
SET NVBACKUPSGIP
10.1.1.2,bk1sg.mycompay.
com,bk2.mycompany.com
Table 5: VPNremote for 4600 Series IP Telephones Customizable System
Parameters (continued)
Parameter Name Default
Value Description and Value Range Example
5 of 15