Avaya 4600 - Manual (Page 43)

Issue 2 July 2006 43
VPNMONFRQ
0
This value contains the
frequency of VPN monitoring
syslog message in minutes.
If a syslog server IP address is
specified (LOGSRVR) and
VPNMONFRQ contains a valid
value, VPNremote Phone sends
a syslog message every
VPNMONFRQ minutes. This
message contains following data
points:
● Duration for which phone
has been up in minutes.
● Number of times phone lost
contact with the Security
Gateway but successfully
recovered without
rebooting.
● IP Address of the Security
Gateway to which the
phone is connected.
● Cumulative IPsec stats
(Packets sent, received,
errors encountered)
To set the VPN monitoring
frequency, use the following
command:
SET VPNMONFRQ 20
DROPCLEAR
1 Controls the policy that defines
the handling on incoming and
outgoing clear packets. Valid
value is one ASCII numeric digit,
0 and 1. Values are:
0 =All clear traffic is accepted.
1 = All clear traffic will be
dropped except for traffic to and
from the security gateway and
the DHCP server.
Table 5: VPNremote for 4600 Series IP Telephones Customizable System
Parameters (continued)
Parameter Name Default
Value Description and Value Range Example
13 of 15