Avaya 4600 - Manual (Page 46)

System Parameters Customization
46 Administrator Guide
The parameters in Table 6 are configurable in the Script File when the parameter
NVVPNCFGPROF is set to 1. For additional information on the Script File, see the Avaya 4600
Series IP Telephone, Release 2.4, LAN Administrator Guide, Server Administration chapter,
Contents of the Upgrade Script section. We recommend that you administer options on the
4600 Series IP Telephones using script files.
Table 6: VPNremote for 4600 Series IP Telephones Specific Customizable System
Parameters
Parameter Name Default
Value Description and Value Range Example
NVIKEPSK 2 This value controls the
preshared key (PSK). The
preshared key is used during
phase 1 negotiation. The length
of the preshared key string
cannot exceed 30 characters.
Avaya recommends that the user
enter the preshared key using
the telephone keypad. However,
if you do not want to share PSK
with the end user because it is
common for multiple users, you
can use this parameter to push
the PSK (Group password) to
each telephone. If you are
pushing the PSK to the
telephone, make sure that the
file server is on an isolated
network and is used only for
provision in VPN parameters to
the telephones.
To set the preshared key as
abc1234, use the following
command:
SET NVIKEPSK abc1234
1 of 8