Avaya 4600 - Manual (Page 48)

System Parameters Customization
48 Administrator Guide
NVIPSECSUBNET 2 This parameter contains the IP
subnet and masks that are
protected by the security device.
Multiple subnet and masks are
separated by commas. The
length of the individual URL
cannot be more than 128
characters. The combined length
of all the subnet and masks
strings cannot be more than 5.
Description:
By default phone assumes that
all the network resources are
behind the security gateway
hence it negotiates for a
security association between
the IP address (or Virtual IP if
delivered through the IKE
Config mode) and 0.0.0.0 with
the security device. If your
security device is configured to
allow building security
association for selected
subnets, you can specify them
here.
To set the IP subnet and mask
that are protected by the security
device, use the following
command:
SET NVIPSECSUBNET
10.1.12.0/24,172.16.0.0/
16
OR
SET NVIPSECSUBNET
10.1.12.0/
255.255.255.0,172.16.0.0
/255.255.0.0
NVVPNSYSLOG 0.0.0.0 This parameter allows the
VPNremote Phone to send
operational information to a
syslog server that is specified by
the respective IP address.
Table 6: VPNremote for 4600 Series IP Telephones Specific Customizable System
Parameters (continued)
Parameter Name Default
Value Description and Value Range Example
3 of 8