Avaya 4600 - Manual (Page 45)

Issue 2 July 2006 45
ALWSTOPVPN 1 This parameter contains the
policy that defines if the user is
allowed to stop VPN while
connected to the call server.
Values are:
1=enable
2=disable
EXTVPNS Null ("") This parameter contains the list of
security device IP addresses.
These addresses are used to
connect to the Enterprise network
from an external source.
Enter the value in dotted decimal
format or DNS name format. Valid
values are zero or more IP
addresses separated by commas
without any intervening spaces (0
to 255 ASCII characters, including
commas), or null ("").
The length of individual VPN
server IP address cannot be
exceed 16 characters.
If the IP address or DNS name of
the VPN server to which
client is currently connected is
included in this list then value
of ALWSTOPVPN will be treated
as 0 even if it was SET as 1
through SET command in the
script file.
VPNACTIVE The VPNACTIVE value is 1
when the VPN tunnel is active
and 0 when the VPN tunnel is
not active. This value is read-only.
Table 5: VPNremote for 4600 Series IP Telephones Customizable System
Parameters (continued)
Parameter Name Default
Value Description and Value Range Example
15 of 15