Seed Hawk Air Drill Monitor 2008 - Manual (Page 15)

Seed Hawk Air Drill Monitor
SeedHawk Manual 01.doc Not Released Page 13
DISPLAY FUNCTION COMMENTS
START
REVS Counts the number of
revolutions the shaft has turned
Drive short distance and collect
material seeded.
WEIGHT Enter Weight of material
collected
Use UP and DOWN to enter
weight in pounds (kg).
WT/REV Calculated weight per revolution
of the shaft.
Weight divided by number of
revolutions
SAVE Y Select whether to save the
calculated application rate
UP selects for Yes, DOWN selects
for No.
3.5 Width And Units
Activate either of the area functions, FIELD or TOTAL, in order to change these settings.
DISPLAY 1 FUNCTION RANGE COMMENTS
WIDTH Implement width 0 to 100 ft
(30.5 m) Default is 30 ft (9.1 m)
UNITS Units used for display 0 or 1
DOWN selects 0 for imperial
units (default).
UP selects 1 for metric units.
3.6 Rate
There are no menu settings for the Rate display item.