Seed Hawk Air Drill Monitor 2008 - Manual (Page 28)

Seed Hawk Air Drill Monitor
SeedHawk Manual 01.doc Not Released Page 26
5.4 General Mechanical Specification
The monitor case is black ABS plastic with a metal mounting bracket.
The front panel overlay is polycarbonate. The front panel is made from 22 gauge steel. The
display is protected by a glass window.
The signal cable is 30 inches of SJTW 18-3 and is terminated with a 3 conductor Packard
WeatherPak connector plug.
The power cable is 30 inches of SJTW 18-2 and is terminated with a 2 conductor Packard
WeatherPak connector plug.
The signal cable for the optional standard RADAR sensor is 4 feet of UL2509 18-4
terminated with a 4 terminal AMP CPC connector.
All cables exit through the rear of the unit through water tight circular strain reliefs.
The printed circuit boards are coated against humidity.