Spectra Precision FAST Survey - Manual (Page 12)

English
4
Registering as a FAST Survey User
The first time you start FAST Survey, you will be prompted to
register your license of the software. If you do not register,
FAST Survey will remain in demo mode, limiting each job file
to a maximum of 30 points.
FAST Survey registration is done via the Internet at the
following address:
http://www.survce.com/FASTSurvey
You will be asked to enter the following information:
• User Name
• Company Name
• Serial Number*
• Email Address
• Phone Number
• Fax Number
• Hardware ID#1*
• Hardware ID#2*
• Reason for Install
• Registration Code*
*: Select Equip>About Fast Survey>Change Registration in FAST
Survey to read this information.
After you submit this information, your change key will be
displayed and emailed to the address that you submit. Keep
this for your permanent records. You may then enter the
manufacturer and model of your equipment.
If you do not have access to the Internet, you may fax the
above information to (+1) 606-564-9525. Your registration
information will be faxed back to you within 48 hours. During
this time, you may continue to use the program without
restriction. After you receive your Change Key, enter it and tap
OK. You can then create a new FAST Survey job, as explained
further.