Spectra Precision FAST Survey - Manual (Page 24)

English
16
Network:
You need to set the Network field when a GSM modem is used.
For each GNSS receiver model, the table below lists the type
of connection you can implement (
Network field), based on
the choice you make for “ Device”.
NOTE 1: In some cases, the Network field may include the
None option. This option does not correspond to any specific
operating mode. When this option is selected, the base will
NOT deliver any corrections through whatever existing
communication channel.
NOTE 2: The internal GSM modem of the ProMark 800 and
ProFlex 800 CANNOT operate in Direct Dial (CSD mode).
Direct Dial is only possible using the data collector modem.
That means the data collector should stay connected to the
ProMark 800 or ProFlex 800 throughout the base operating
session.
More information is provided below about modem settings
(see 1. below) and how to define the network the base will
connect to. Two cases of network definitions are described:
NTRIP (see 2. below) and TCP/IP (see 3. below).
Your Choice
for “Device”
EPOCH 50 ProMark 220
ProMark
800
ProFlex
800
“Internal GSM”
NTRIP
TCP/IP Network
UDP/IP Network
“Data Collector
Internet” TCP/IP Network
UDP/IP Network
TCP/IP Network
UDP/IP Network
“Data Collector
Phone” Network field forced to “Phone Server” meaning the base is
configured to be called by a rover (modem used in CSD mode).
“Internet/
Phone”
NTRIP
Direct Dial
TCP/IP Network
“GSM Modem” Direct Dial