Spectra Precision FAST Survey - Manual (Page 55)

Engl
ish
47
from now on, it is used in the localization procedure for
the processing of elevations.
Deselecting the Currently Used Geoid File
In FAST Survey, do the following:
• In the Equip menu, tap on the Localization button.
• Tap on the GPS tab.
• Tap on the Geoid File: button. This opens the
\MyDevice\FAST Survey\Data\ folder.
• Select the file corresponding to the geoid currently used.
• Tap . This causes the geoid filename to disappear from
underneath the Geoid File: button, meaning the geoid is no
longer used in FAST Survey.