Spectra Precision FAST Survey - Manual (Page 44)

English
36
Using GNSS Solutions:
• Run GNSS Solutions on your office computer.
• Open the project containing the stakeout points you want
to transfer to the receiver or data collector as your job.
• On the project map view, select all the reference and
target points making up your job.
• Select Project>Upload Positions to External Device..
• Select RTK Job and FAST Survey data collector.
• Click OK.
• Name the job (e.g. MYJOB). Keep the Selected Targets and
References option selected and click OK. This opens the
Data Transfer dialog box.
• In the combo box, select Active Sync and keep Automatic
transfer enabled.
• Click OK to establish the connection with the receiver or
data collector and upload the job (to \My Device\Program
Files\FAST Survey\Data\).
• After the job has been uploaded, turn off the receiver or
data collector, disconnect the USB cable and go to the
field with your surveying equipment to stake out your
points.
Staking Out Points 1. Run FAST Survey and open the job containing the points
you want to stake out.
2. Tap on the Survey tab and then select Stake Points. The
screen now displayed allows you to stake out points.
3. On this screen, FAST Survey asks you to choose the point
you want to stake out. You can either type in its
coordinates in the
Northing, Easting and Elevation fields, or
select a pre-defined point from the points list (see File>
Points). You can also define graphically the point by
tapping on the point on the graphic screen, or define the
point according to azimuth, slope and horizontal distance.