Star Water Systems HSP20P1 User Manual
Page 8
Advertising
8
PUMP PREPARATION FOR WELL ANd SURFAcE WATER
7. Glue the male thread side of a 1-1/2 in. union
(not included) to the pipe.
8. Thread 2 in. MPT x 2 in. slip adaptor (not
included) into the inlet port located on the
front of the pump body.
9. Glue an 8 in. section of 2 in. pipe (not
included) into the 2 in. adaptor.
7
8
9
Advertising