Star Water Systems HSP20P1 - Manual (Page 9)

9
PUMP PREPARATION FOR WELL ANd SURFAcE WATER
10. Glue one side of a 2 in. union (not included)
to the pipe.
For Well Installations
11. Thread a 2 in. MPT x 2 in. slip adaptor (not
included) into the foot valve.
12. Glue 2 in. pipe (not included) into the
adaptor. Glue enough sections of pipe
together using 2 in. couplers (not included)
in order for the foot valve to be completely
submerged in water. Be sure inlet pipe
will remain fully submerged at the lowest
expected level of the water source.
10
11
12