AccuMac AM8060 User Manual
Page 33
AM8060 Precision Thermometer
User’s Guide
32/43
While using the flash drive, the data saving period can be adjusted
with the front panel. The default saving period is 1.21 seconds,
and it can be set as a multiple of this value, with the multiple
ranging between 1 and 65,535. The instructions for this are as
follows:
A. When AM8060 is in a normal working state, press
MENU
key
and then hold
key for 3 seconds. The AM8060 will
display the main menu as below:
B. Press
key or
key to move the cursor line with ”>”
sign to “ > U-Drive Setting”, then press
key to go to the
“Record Cycle adjustment” program, as seen below. “N”
represents how often the temperature will be saved as a
multiple of 1.21 seconds. The current value is “1”.
C. To set a sample frequency other than “1”, press and hold
key while pressing
key, and a display similar to the one
below will appear.