AccuMac AM8060 - Manual (Page 38)

AM8060 Precision Thermometer
User’s Guide
37/43
required, users can adjust the value in the box. Any adjustment
must be done when the measurement is in the “Stop” state as
shown in the figure above.
To save the captured temperature data, click on “Start”. The
temperature data should be displayed with a blinking tick mark
to indicate the data capturing, then users can click on “REC” to
start the data saving. The phrase “Recording…” will be
displayed on the screen as the data is saved to the file, named
“U_x2data.txt”. To stop the data saving, just click on “END” or
“Stop”, and the temperature data saving will be stopped.
The following figure shows that the data is saved to file with a
sampling period of 3 seconds.
Data saved in “U_x2data.txt” will appear in the following
format: