Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 120)

V-chip Setting screen
No. Item Details
CC setting display This is pressed to display the closed caption setting screen.
Tool buttons Load: Press this to load the data from a file.
Save: Press this to save the edited data in a file.
Send: Press this to send the edited data to the VG generator, and register it in
the generator.
Receive: Press this to receive data from the VG generator.
Program No The number of the program which has been sent or received appears here.
System This is where the system setting is selected. OFF,MPAA, U.S. TV, Canadian
English or Canadian French can be set.
Rating This is where the rating classifications are set. The items which can be set differ
depending on the system.
MAPP: G., PG, PG-13, R, NC-17, X
U.S.TV: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, TV-MA
English: E, C, C8+, G, PG, 14+, 18+
French: E, G, 8ans+, 13ans+, 16ans+, 18ans+
This is where the U.S. TV extension system is selected. None, FV, V, S, L or D can
be set.
Interval This is where the interval at which the rating data is to be sent is set. Any interval
from 0 to 1023 v can be set
UserNo The closed caption pattern number is set here.
LoopTime Displays the caption data that was looped by every setting value. Any LoopTime
from 0 to 10 seconds can be set.
Delay Starts the display of the Caption data after the fixed time. Any Delay from 0 to 10
seconds can be set
DefaultData Select the Mode and Style settings for the default caption data output.
Help This is pressed to display the help information.
Close This is pressed to close the program.
* For further details on the settings, refer to the instruction manual of the VG generator (VG-858).
112