Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 19)

Chapter 2 Operation
11
2.3. Closing VGBase
Procedure for closing "VGBase"
Click the [Close] button.
2.4. Configuration settings
Procedure for changing the VG execution mode and other configuration settings
2.4.1. Startup method
Click the [Config] button of "VGBase." This starts up the "Configuration Editor" program which performs the
configuration settings.
2.4.2. Window screen and description
Environment page
The directory containing the data files can be set on this page.
Model Name The VG model name is indicated here.
Data Dir The directory in which the data is stored is set here. Under normal
circumstances, no changes should be made to the directory since it
requires a specific structure.
All the settings must match the communication parameters which are set for the
VG unit. As such, special care is required when setting or changing the items on