Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 46)

GRAPHIC: Graphic color
This is used to set the graphic colors.
When the analog mode or Tri-Sync has been selected as the output condition "Mode" setting, "Analog Color" can be
set; when the TTL mode has been selected, "TTL Color" can be set.
When the analog mode or Tri-Sync has been selected as the output condition "Mode" setting:
Analog color : The RGB values are set here.
When the TTL mode has been selected as the output condition "Mode" setting:
TTL Color : The TTL color values are set here.
Background ON or OFF is selected here.
Background Color The RGB values of the background color are set here.
* 8bit or 10bit can be selected in VG-835. The level can be set between 0 to 255 in 8 bit mode, 0 to 1023 in 10
bit mode.
* 8bit , 10bit and 12bit can be selected in VG-835-A. The level can be set between 0 to 255 in 8 bit mode, 0 to
1023 in 10 bit mode, 0 to 4095 in 12 bit mode.
38