Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 97)

Chapter 2 Operation
89
2.14. Color difference coefficient data editing program
This section describes how to use the editing program to set the color difference coefficient
data of the VG. The program enables the color difference coefficient data of the VG to be
edited in Windows, the edited color difference coefficient data to be sent to the VG, and
color difference coefficient data from the VG to be received.
2.14.1. Startup method
Select [Start]
→ [Programs] → [SP-8848] → [CDCEdit].
2.14.2. Window screen and description
No. Item Details
Toolbar Load: Click this to load the color difference coefficient data.
Save: Click this to save the color difference coefficient data in a file
and overwrite any existing data in that file in the process.
Save As: Click this to save the color difference coefficient data in a
new file.
Send: Click this to send the color difference coefficient data which is
being edited to the VG.
Receive: Click this to receive the color difference coefficient data from
the VG.
Print: Click this to print the color difference coefficient data.
Teble No The number of the color difference coefficient data table which has been
sent to or received from the VG appears here.
Name The name of the displayed color difference coefficient data appears here.
Editing area This is the part of the screen where the color difference coefficient data is
created, changed and displayed.