Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 54)

No. Item name Details
AVI
ON/OFF
Select ON or OFF of InfoFrameAVI.
Type
Display the type of InfoFrameAVI.
Version
Set the version of InfoFrameAVI. Select either 1 or 2.
ScanInfo
Set the ScanInfo. Select from NoData, Overscanned, or Underscanned.
BarInfo
Set about the BarInfo. Select from NotValied, Vert, Horiz or Vert&Horiz.
Scaling
Set about the Scaling. Select from unknown, Vert, Horiz or Vert&Horiz.
ActiveFormatInfo
Set about the ActiveFormatInfo. Select either NoData or Valid.
RGB/YCbCr
Set either RGB or YcbCr. Select from RGB, YCbCr422 or YCbCr444.
ActiveAspectRatio
Set the active aspect ratio. Select from Same, 4:3, 16:9 or 14:9.
PictureAspectRatio
Set the picture aspect ratio. Select NoData, 4:3 or 16:9.
Colorimetry
Set about the Colorimetry. Select from NoData, SMPTE, or ITU709.
VideoCode
Set the VideoCode. Select between 0 and 34
Repetition
Set about the Repetition. Select between 1 and 10.
End of Top Bar
Set the Top Bar. Select between 1 and 65535.
Start of Bottom Bar
Set the Bottom Bar. Select between 1 and 65535.
End of Left Bar
Set the Left Bar. Select between 1 and 65535.
Start of Right Bar
Set the Right Bar. Select between 1 and 65535.
SPD
ON/OFF
Select ON or OFF of InfoFrameSPD.
Type
Display the type of InfoFrameSPD.
Version
Set the version of InfoFrameSPD. One version is fixed.
VendorName
Set the VendorName. Input using ASCII letters.
ProductDescript
Set the ProductDescript. Input using ASCII letters.
SourceDevice
Set the SourceDevice. Select from unknown, DigiSTB, DVD, DVHS, HDD, DVC,
DSC, CD, Game or PC.
Audio
ON/OFF
Select ON or OFF of InfoFrameAudio.
Type
Display the type of InfoFrameAudio.
Version
Set the version of InfoFrameAudio. One version is fixed.
Channel Count
Set the channel counting. Select from Refer, 2ch, 3ch, 4ch, 5ch, 6ch, 7ch or 8ch.
CodingType
Set the coding type. Select from Refer, IEC60958, AC3, MPEG1, MP3, MPEG2,
AAC, DTS or ATRAC.
SampleSize
Set the sampling size. Select from
, 16bit, 20bit or 24bit.
SampleFreq
Set the sampling frequency. Select from
, 32kHz, 44.1kHz, 48kHz,
88.2kHz, 96kHz, 176.4kHz or 192kHz.
Channel/Speaker Allocation
Set the speaker channel. Set between 0 and 31.
46