Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 22)

*1: As a general rule, use the default value for the port number. If it cannot be used due to the network
connected, change to a different port number for use.
When the [Edit] button is pressed, a setting dialog box such as the one shown below appears.
Name The VG name is displayed here.
IP Address The IP address is displayed here.
When PC has been selected as the communication method:
Memory Card Drive The drive to which the memory card (*) is connected is selected
here when PC has been selected as the communication method.
*Use the Compact Flash (CF) card provided with the VG-848 as a standard accessory for the memory card.
14