Astro Design PORTABLE SIGNAL GENERATOR PROGRAMMING SOFTWARE SP-8848 - Manual (Page 28)

Timing data setting screen
Vertical timing data setting screen Horizontal timing data setting
[Setting the data]
Align the mouse cursor with the data to be changed, and click the mouse. The data can now be keyed in.
[Setting the input mode]
Select microseconds (usec), dots or kHz as the units for the horizontal timing (H TIMING) data and milliseconds
(msec), H or Hz as the units for the vertical timing (V TIMING) data. The check box enabling the unit to be input
changes.
[Setting the fixed mode]
A fixed mode is provided for DotClock, Period and Disp of the horizontal timing (H TIMING) data and Total and Disp
of the vertical timing (V TIMING) data so that these data items will not be changed when other data items (such as
DotClock and Period) have been changed. Check the fixed mode if changes are not going to be made to these data
items.
20