Revo NVR - Manual (Page 22)

Part 2 - Getting Started
22
Camera Registration
Once Network Setup Wizard is complete, the system
will automatically enter Camera Registration mode and
scan for cameras connected to the NVR.
1 2
3
4
5
1 Camera Scan Button
2 Camera View Menus
3 Camera List Area
4 Video Display Area
5 Apply/Cancel Buttons
Camera Scan Button
You can scan and search and register cameras that
were not detected automatically.
Pressing the
Scan button displays the following
submenu.
• Rescan: Scans for cameras that were not scanned
automatically.
• Go To Camera: Moves the focus automatically to
the camera using MAC address of camera in the
camera list.
• Auto Detection: Activated in Live mode.
Automatically notifies the user of unregistered
camera connections.
Camera View Buttons
• ALIGNMENT Button: Realigns camera screens
displayed on the video display area in the order of
Video In port connections.
• RESET Button: Refreshes the video display area
and the camera list.
Selecting RESET clears all scanned devices from
the list.
Camera List Area
1
2 3 4