Revo NVR - Manual (Page 69)

69
REVO Remote is a program that allows you to view and search video from remote locations over the Internet and
can be accessed on a regular web browser such as Internet Explorer.
System requirements for running REVO Remote are as follows:
• OS: Microsoft ® Windows ® XP (Service Pack 3), Microsoft ® Windows ® Vista (Service Pack 1), Microsoft ®
Windows ® 7 (Home Premium, Professional, Ultimate) or Microsoft ® Windows ® 8 (Pro, Enterprise)
• CPU: Intel Pentium IV 2.4GHz or above (Core 2 Duo E4600 recommended)
• RAM: 1GB or more
• VGA: 128MB or more (1280x1024, 24bpp or above)
• Internet Explorer: Ver. 7.0 or above (32-Bit)
• REVO Remote only works with Microsoft Internet Explorer and will NOT work with other browsers.
• REVO Remote does not work in Microsoft ® Windows ® 8 metro UI.
1
Launch Internet Explorer and then enter the following information in the address bar.
– http://IP Address:Port Number (NVR system's IP address and REVO Remote port number configured under
Network > General (Default Value: 12088))
– http://www.revodvr.com/NVR name (The NVR name registered on the DVRNS server)
Contact your network administrator for the IP address of the NVR you wish to connect to and the REVO Remote port
number.
2
When prompted with the REVO Remote login window, select REMOTE WATCH or REMOTE SEARCH as
the desired mode. Enter the ID and password and click LOGIN to sign in using the selected mode.
If connecting by entering http://www.revodvr.com, enter the NVR's IP address in the Device Address field.
Selecting the Use DVRNS option on the login window allows you to enter the NVR name registered to the
DVRNS server instead of its IP address. You will be prompted to enter the DVRNS server's address and port
number under Setup.
• Do not close the login window while REVO Remote is running. Switching over to Web monitoring or Web Search
mode can cause a script error, requiring you to restart the REVO Remote program.
• If running REVO Remote, the bottom section of the screen may get cut off if the address bar or the status bar
is shown. In this case, change Internet Options so that the address bar or the status bar is hidden. ( Tools →
Internet Options → Security → Custom level... → Allow websites to open windows without address or
status bars (Enable))
• To use REVO Remote on Microsoft Windows Vista or above, launch Internet Explorer by right-clicking on the
icon and selecting the Run as administrator option. Otherwise, certain REVO Remote functions might not be
available.
Part 5 - REVO Remote
REVO Remote