Revo NVR - Manual (Page 52)

Part 3 - Configuration
52
• Text-In: Displays strings received from text-in
devices. Select
Display Dwell and specify how
long to display the text-in string. Text-in strings are
shown on the single screen only.
• Zoom: Displays a zoomed in state.
• Network: Displays the icon when the unit is
connected to a network via Ethernet.
• Freeze & Sequence: Displays freeze and
sequence icons.
• Screen Group: Displays the current screen's
group.
Main Monitor
Configure monitor-related settings.
• Mode: Select Full Sequence or Cameo
Sequence.
• Interval: Select between 3 secs and 2 mins.
For more information on Sequence, refer to the
Sequence on page 27.
• Event Monitoring On: With Event Monitoring
enabled, video feed from the camera configured
to start recording when an event occurs is shown
on the screen. For more information on Event
Monitoring, refer to the
Event Monitoring on page
32.
• Resolution: Select 1920 x 1200, 1920 x 1080,
1680 x 1050, 1600 x 1200.
Notification Setup
Schedule
Select the + icon at the lower left corner of the screen
to add a notification schedule.
• Day: Add different schedules for different days of
the week.
• Range: Change the event notification time frame.
• Notify: Select which notifications to generate when
an event occurs. Select
Mail, LAN 1 through 5,
SNS, Push, and/or Alert Window.
• In order to use the Notification (Callback) feature,
the NVR must be registered on the remote
program.
• Select the icon to delete the existing schedule.
• Summary Email Interval: Transmit event summary
emails to a remote destination at specified intervals.
Callback
Configure Callback settings.
Enter the IP address of the receiving server and set
Retry to between 1 and 10 in case of connection
failure.