Revo NVR - Manual (Page 39)

Part 3 - Configuration
39
Storage
Use this option to configure storage settings.
• Type: Indicates the type of the installed disk.
• Capacity: Indicates the disk's capacity.
• Format: If the disk has been formatted, indicates
either
Record or Not Using. If you have connected
an unformatted storage device, the Use As value will
be indicated as
Not Formatted.
• Information: Indicates if the disk is being used
for recording purposes. Disks that were used in
different systems will show up as
Other. Select
Information to check the saved data's time
information or select
Delete to erase the data.
• Select Format to prepare the disk as a storage for
data recording.
• Disks formatted with Use As set to Not Using will
not be used for data recording.
• This NVR supports SATA2 HDDs.
Monitoring
Use this option to configure Monitoring settings.
• Settings: Configure when and what the system
should monitor for.
• Actions: Configure alarm-out (channel, beep) and
notification (email, LAN1 through 5, SNS, push, alert
window) settings.