SHIMPO DAG-2000 - Manual (Page 6)

DIGITAL AIR MICROMETER USERS MANUAL (Second Edition)
6
CHAPTER 2 NAME AND FUNCTION OF EACH PART
• Sensitivity (MAG) adjustment tuner
Adjusts the sensitivity of the air
circuit. No need for adjustments
except during measurement tool
replacement and master calibration
error.
• Zero adjustment tuner
Adjusts the zero position of the air
circuit. No need for adjustments
except during measurement tool
replacement and master calibration
error.
• Mode lamp
Displays the current mode and master calibration
condition.
• Main display
4 digits 3 colors digital display. Displays the
measurement value and judgment result (rank no.).
• Judgment lamp
Displays the judgment results.
• English display
Displays simple bar, measurement value, settings
item name, settings value, etc.
• Panel switch
Used for mode switching, settings item selection,
settings value input, etc.
• RS232C Connector
Connector for serial communications
used for connecting the PC to the
printer.
• Switch input connector
Connector for measurement command
and master calibration input done by
external push button. Optional foot
switch and push button is available.
Cannot be used expect for foot switch
and push button.
• DC input connector
[Optional]
Connector for connecting to the lamp,
PLC, etc. There are 2 types –
judgment output and BCD output.
Capable of measurement command and
master calibration input.
• Analog input connector
[Optional]
Please inquire to the maker on how to
use.
• Air pressure input
Please supply pure air at 0.196
±0.005MPa.
Optional precision regulator and filter is available.
• Power switch
• Silencer
• Power connector (Input)
Can be used at AC85~264V range but for the cable
included, please use within AC85~125V.
• Measurement nozzle port
Please connect measurement tool.
• Regulator bracket
Hole for fitting (M3)