14 installing the application software – Techne PrimeQ User Manual
Page 27
27
1.14 Installing the application software
Always set your PC or laptop from which you are running PrimeQ so that standby is switched OFF.
This can easily be achieved through the control panel or:
• Right click on the desktop and select Properties.
• Select the Screen Saver tab and click on the Power button.
• Activate the power scheme entitled Always On from the drop down menu and click Apply.
You may need to restart your computer.
1.14.1
Set the decimal symbol to‘.’
Before installing this software please ensure that the decimal symbol on the computer is set to ‘.’.
If it is not then follow these instructions:
• Click on the Start button:
•
Go to
Control Panel:
• Select Regional and Language Options:
• Ensure the decimal in the number section is
set to a ‘.’