Airedale OnRak 3kW 35kW - Manual (Page 44)

LogiCool
™ OnRak
Active Cabinet Exhaust
IT Cooling
44
IT Cooling
Technical, Installation and Maintenance Manual :6912497 V1.5.0 02_2013
Extra Functions Buttons
+ +
UP +
DOWN+
ENTER
Allow users to change display address.
+
ALARM +
ENTER
Allows access to controller system information.
+
ALARM +
UP Allows access to change controller address (only when display
address is zero)
Esc
+
ESC +
ENTER
Allows the user to switch between the preinstalled languages
Prg
+
PRG +
ENTER
Temporary displays the address of the controller.
+
ENTER +
UP
Change unit on remote display keypad.
Navigation
Initially, use the
Prg
button to access the main navigation menu, the cursor will appear in the top right hand corner with
the first menu UNIT ON/OFF selected.
Use the and buttons to move to the desired menu. The selected menu will be shown in BLOCK CAPITALS.
Press to enter the selected menu.
Navigation Sub Menus
There are eight sub menus available from the main navigation menu, these are listed below:
1. Unit On/Off
Allows the user to switch on or switch off the unit.
2. Maintenance
Allows the user to view maintenance related parameters, such as hours run, sensor
calibration and manual overrides.
3. Alarm Log Allows the user to view the alarm log.
4. Input/Output Allows the user to view the status of the controller inputs and outputs.
5. Clock
Allows the user to view the current time, date and day of the week. On/Off and
temperature time zones can also be set.
6. Set point Allows the user to adjust the return air temperature set point.
7. User
Allows the user to adjust user related parameters, such as high and low alarm limits
and temperature bands.
8. Manufacturer
Allows the user to enter the manufacturer menu and adjust various manufacturer
related parameters, such as unit configuration and timing settings.