Blue-White CHEM-PRO C3 ProSeries Diaphragm Pump - Manual (Page 4)

2.0 Specifications
2.1 Materials of construction
3.0 Features
Motor driven diaphragm pump offers smooth and quiet chemical dosing. No hard pulses as seen with solenoid driven
pumps.
Full stroke every time avoids vapor lock.
Variable speed DC motor.
Rated for continuous duty (24X7).
PVDF / PTFE / Ceramic pump head components.
Diaphragm Failure Detection (DFD) system. Senses diaphragm failure by detecting chemical in pump head.
Backlit LCD displays motor speed, input signal values, service and alarm status.
CNC precision machined cam and piston for optimum efficiency, unparalleled accuracy, and linearity.
Heavy duty PVDF pump head and valves are standard.
Priming valve built directly into pump head.
Compatible with Blue-White’s output Flow Verification Sensor (FVS) system.
Enclosure Rating:
NEMA 4X: Constructed for either indoor or outdoor use to provide a degree of protection to personnel against
incidental contact with enclosed equipment; to provide a degree of protection against falling dirt, rain, sleet,
snow, windblown dust, splashing water, and hose-directed water; and that will be undamaged by external
formation of ice on enclosure.
IP66: No ingress of dust; complete protection against contact. Water projected in powerful jets against
enclosure from any direction shall have no harmful effects.
Wetted components: Non-Wetted components:
Motor:
Brushed DC, 1/8 H.P.
Duty cycle:
Continuous
Motor speed adjustment range 100:1:
1.0% - 100% motor speed (1.3 to 130 RPM)
Motor speed adjustment resolution:
0.1% increments
Accuracy:
+/- 2% of full scale
Repeatability +/- 0.5%
Display
Backlit LCD, UV resistant.
Keypad
Five button positive action tactile switch keypad.
Enclosure:
NEMA 4X (IP66), Powder coated aluminum.
Maximum overall dimensions:
C2 models:
11-3/4”W x 7-3/4”H x 10-3/4”D (298W x 197H x 274D mm)
C3 models: 13-1/8”W x 9”H x 10-3/4”D (333W x 228H x 274D mm)
Approximate shipping wt:
C2 models: 24 lb. (10.9 Kg)
C3 models: 29 lb. (13.1 Kg)
Maximum working pressure*:
175 psig (12 bar), *model specific
Note: see individual pump model maximum pressure ratings.
Maximum Fluid temperature (excluding pump tubes) :
o o 130 F (54 C)
Note: see individual pump tube assembly maximum temperature
ratings.
Maximum fluid viscosity:
1,000 Centipoise
Maximum suction lift:
15 ft. Water, 0 psig (4.5 m, 0 bar)
Ambient Operating Temperature
O O O O 14 F to 115 F (-10 C to 46 C)
Ambient Storage Temperature
O O O O -40 F to 158 F (-40 C to 70 C)
Operating Voltage:
115VAC/60Hz, 1ph (1.5 Amp Maximum)
230VAC/60Hz, 1ph (0.7 Amp Maximum)
220VAC/50Hz, 1ph (1.0 Amp Maximum)
240VAC/50Hz, 1ph (1.0 Amp Maximum)
Power Cord Options:
115V60Hz = NEMA 5/15 (USA)
230V60Hz = NEMA 6/15 (USA)
220V50Hz = CEE 7/VII (EU)
240V50Hz = AS 3112 (Australia/New Zealand)
3.1 Agency Listings
Symbol Explanation
!
WARNING, risk of electric shock
CAUTION, refer to users’ guide
GROUND, PROTECTIVE CONDUCTOR TERMINAL
This pump is ETL listed to conforms to the following:
UL Standard 778 as a motor operated water pump
CSA Standard C22.2 as process control equipment
This pump complies to the Machinery Directive 98/37/EC, BS EN 60204-1, Low Voltage Directive
73/23/EC BS EN 61010-1, EMC Directive 89/336/EC, BS EN 50081-1/BS EN 50082-1.
Page 4 Page 5
Pump Head Assembly:
Pump Head: .. ...... ...... ............ ......PVDF
Adapter Connections: ........... ......PVDF
Prime/Degassing Valve: ........ ......PVDF
Valve Cartridges: ...... ............ ......PVDF
Valve Balls: ... ...... ...... ............ ......Ceramic
Valve Ball Seats: . ...... ............ ......TFE/P
Tetrafluorethylene/propylene
q Static Seals: .. ...... ...... ............ ......Viton (optional EP)
q q Diaphragm: ... ...... ...... ............ ......PTFE coated Hypalon
Injection / Back-flow Check valve:
Body & insert: .... ...... ............ ......PVDF
Check Ball:... ...... ...... ............ ......Ceramic
Spring: ... ...... ...... ...... ............ ......Hastelloy C-276
q O-ring seals: ...... ...... ............ ......Viton (optional EP)
Suction Tubing: .... ............ ......Clear PVC (if supplied)
Discharge Tubing
3/4” x 1/2” Tube connections : ....Not supplied
1/4” x 3/8” Tube connections : ....Natural Polyethylene (LLDPE)
Foot Valve / Strainer:
Body & Adapter:. ...... ............ ......PVDF
Check Ball:... ...... ...... ............ ......Ceramic
Spring: ... ...... ...... ...... ............ ......Hastelloy C-276
q O-ring seals: ...... ...... ............ ......Viton (optional EP)
Filter screen: ...... ...... ............ ......Polypropylene
Enclosure:
413 Aluminum (Polyester powder coated)
Pump Head Cover:
413 Aluminum (Polyester powder coated)
Cover Screws:
300 Series Stainless Steel
DFD System Sensor pins:
Hastelloy C-276
Power Cord:
3 conductor, SJTW-A Water-resistant
Mounting Brackets and Hardware:
316 Series Stainless Steel
Chem-Pro Chem-Pro ® ®